Tempo L4-140 2.3L HSC (1986)
7.
Lower vehicle.
8.
Install idler pulley bracket.
9.
Install idler pulley.
10.
Install engine mounts.
11.
Install belt tensioner.
12.
Remove engine support bar.
13.
Install fuel line shield.
14.
Install drive belt.
15.
Connect battery ground cable.
Front Cover Seal - Removal
1.
Open hood.
2.
Disconnect battery ground cable.
3.
Remove drive belt.
4.
Remove the fuel line shield.
Rotunda Engine Support Bar
5.
Install Rotunda Engine Support Bar (014-00750) or equivalent, Figure 1. The following lift points and procedures are to be used for removing the
engine or supporting it during service, such as for transaxle removal. The equipment required is:
^
Engine Lifting Brackets (D81L-6001-D) or equivalent.
^
Rotunda Engine Support Bars (014-00750) or equivalent. An engine support bar may be made from a length of 4x4" (102x102 mm) wood cut
to about 57" (1448 mm).
