Thunderbird V8-302 5.0L HO (1992)
Seat Belt Motor: Service and Repair
Track and Motor Assembly
REMOVAL
1. Cycle the shoulder belt to the full forward position at the A-pillar. Disengage the shoulder belt from the emergency release buckle.
2. Remove the rear seat cushion.
3. Remove the rear seat back.
4. Remove the A-pillar and the quarter panel trim.
5. Disconnect the electrical connectors at the A-pillar and B-pillar limit switches.
6. Remove the two bolts retaining the vertical belt guide to the quarter inner panel.
7. Remove the three bolts retaining the lower belt guide to the quarter inner panel.
8. Remove the two bolts retaining the motor assembly to the quarter inner panel.
9. Disengage the vertical belt guide at the B-pillar bracket.
10. Remove the two bolts retaining the track assembly to the B-pillar.
11. Remove the sheet metal screw retaining the A-pillar limit switch bracket to the A-pillar.
12. While holding the track assembly securely, remove the two bolts retaining the track assembly to the roof rail.
13. Rotate the track assembly downward at the rear to disengage the A-pillar limit switch bracket from the A-pillar.
14. Remove the track and motor assembly from the vehicle.
