Removal and Installation Draw cord with a minimum length of one meter 1. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Accelerator cable inner cable 4 - Accelerator cable to coolant expansion tank hose retaining clips 2. To install, reverse the removal procedure. Removal Details Item 2 : Accelerator cable to throttle body accelerator cable retaining bracket | -
Rotate and detach the accelerator cable from the throttle body accelerator cable retaining bracket. | Item 3 : Accelerator cable retaining clip | -
For right-hand drive vehicles detach the accelerator cable to engine lifting eye retaining clip. | Item 5 : Accelerator cable retaining clip | -
For right-hand drive vehicles detach the accelerator cable to power steering fluid return pipe retaining clip. | Item 6 : Accelerator cable inner cable | -
Detach the accelerator cable inner cable from the accelerator pedal. | Item 7 : Accelerator cable to bulkhead grommet | -
Detach the accelerator cable from the bulkhead. - Pull the accelerator cable out of the accelerator cable grommet.
- Detach the accelerator cable grommet from the bulkhead.
| Item 8 : Accelerator cable | -
Attach a suitable draw cord to the accelerator cable to assist with installation. | Installation Details Item 8 : Accelerator cable | -
Using the draw cord, install the accelerator cable. Remove the draw cord. | Item 7 : Accelerator cable to bulkhead grommet | -
Install the accelerator cable and grommet. - Install the accelerator cable grommet into the bulkhead.
- Push the accelerator cable into the accelerator cable grommet.
| |