Lubricants, sealants and adhesives
| Material | Specification |
| Refrigerant R134a | WSH-M17B19-A |
| Refrigerant oil | WSH-M1C231-B |
Refrigerant fill quantities
| | Grams |
| Air conditioning | 905 ± 15 |
Refrigerant oil fill quantities
| | Milliliters |
| Air conditioning | 200 |
Addition of Refrigerant Oil (When new components are installed)
CAUTION:The refrigerant oil top-up quantity must not exceed the refrigerant oil fill quantity.
CAUTION:If other A/C components are being renewed in addition to the A/C compressor, there is no need to top up with additional refrigerant oil, apart from filling the compressor.
CAUTION:Because the fill quantities differ, the refrigerant oil must be drained from the new A/C compressor.
| | Milliliters |
| When all lines and components are replaced. | add 200. |
| Air conditioning (A/C) compressor - if the quantity of refrigerant oil drained from the faulty compressor is less than 150 ml | add 150. |
| Air conditioning compressor (if the amount of refrigerant oil drained from the faulty compressor is more than 150 ml) | add 200. |
| Air conditioning condenser | Add 30 |
| Air conditioning evaporator | Add 30 |
| Air conditioning dehydrator | Add 90 |
| Always, if refrigerant was drained. | Add the same quantity as the quantity that was collected. |
Air conditioning (A/C) Clutch
| | mm |
| Air conditioning (A/C) clutch air gap | 0.35 - 0.75 |
Tightening torques
| Description | Nm | lb-ft | lb-in |
| Air conditioning (A/C) compressor drive plate retaining bolt | 13 | 10 | - |
