| Diagnosis and Testing Refer to Wiring Diagrams Cell 419–01A, Anti–Theft—Active for schematic and connector information. Inspection and Verification - Verify the customer concern.
- Visually inspect for obvious signs of mechanical or electrical damage.
Visual Inspection Chart | Mechanical | Electrical | - Misaligned door(s)
- Misaligned hood
- Door latch(es)
- Actuating rod(s)
- Door lock cylinder(s)
- Cable(s)
| - Fuse(s)
- Wiring harness
- Electrical connector(s)
- Vehicle battery
- Door ajar switch(es)
- Anti-theft alarm and double locking module
| - If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
- If the cause is not visually evident, verify the symptom and refer to WDS to diagnose the system.
|
