| Disassembly and Assembly 1. Disassemble the components in the order indicated in the following illustration(s) and table(s). 3 - Door lock cylinder barrel 4 - Door lock cylinder barrel locking pin 6 - Door lock cylinder barrel spring washer 7 - Door lock cylinder barrel spacers 2. To assemble, reverse the disassembly procedure. Disassembly Details Item 1 : Door lock cylinder return spring and guide | | -
Release the door lock cylinder return spring and guide locking tangs and remove. | Item 2 : Door lock cylinder barrel retaining clip | | -
Remove the door lock cylinder barrel retaining clip. | Item 5 : Door lock cylinder barrel tumblers | | -
Make a note of the door lock cylinder barrel tumber identification numbers and the order in which the tumblers and washers are removed. | Assembly Details Item 5 : Door lock cylinder barrel tumblers | | -
The first tumbler to be installed into the door lock cylinder barrel corresponds to the ignition key cut 'F'. | | | -
Make sure that the door lock cylinder barrel tumbler indents align with the barrel locking pin hole. | Item 1 : Door lock cylinder return spring and guide | | -
Make sure that the door lock cylinder return spring locates either side of the door lock cylinder spring retainer. | | 
