| Disassembly and Assembly 1. Disassemble the components in the order indicated in the following illustration(s) and table(s). 3 - Ignition lock cylinder barrel 4 - Ignition lock cylinder barrel locking pin 8 - Ignition lock cylinder barrel spring washer 9 - Ignition lock cylinder barrel spacers 2. To assemble, reverse the disassembly procedure. Disassembly Details Item 1 : Ignition lock cylinder security clip NOTE:Make a note of the position of the ignition lock cylinder security clip. Item 5 : Ignition lock cylinder barrel key hole shield NOTE:Make note of the position of the ignition lock cylinder barrel key hole shield. Assembly Details Item 7 : Ignition lock cylinder barrel tumblers | | -
The first tumbler to be installed into the door lock cylinder barrel corresponds to the ignition key cut 'F'. | | | -
Make sure that the ignition lock cylinder barrel tumbler and spacer indents align with the barrel locking pin hole. | Item 6 : Ignition lock cylinder barrel tumbler retainer | | -
Bend the ignition cylinder barrel castellations over to secure the tumbler retainer in place. | Item 5 : Ignition lock cylinder barrel key hole shield NOTE:Install the ignition lock cylinder barrel key hole shield in the same position as removed. | 
