Specifications Backlash (mm) | 0,12 ‐ 0,22 | Collapsible spacer ‐ height (mm) | 11,7 | Wheel bearing play (mm) | 0,05 ‐ 0,20 | Drive pinion shim thickness (mm) | 1,72 ‐ 2,25 | Ratios | 4,63; 5,14 : 1 | Lubricants, Adhesives and Sealers Rear axle oil | SRM‐2C‐9102‐A | Grease | SAM‐1C‐9111‐A | Sealer | SDM‐4G‐9105‐A (Loctite Type 275) | Thread‐locking compound | SDM‐4G‐9106‐A (Loctite Type 601) | Sealer | ESE‐M4G 195‐A | Brake assembly to axle housing | 50 | 37 | Bearing cap to axle housing | 88 | 65 | Retaining bolt to axle housing bearing cap | 19 | 14 | Crown wheel to differential housing | 128 | 94 | Driveshaft centre bearing to mounting bracket | 33 | 24 | Driveshaft to MT‐75 transmission output flange | 75 | 55 | Driveshaft to rear axle flange | 75 | 55 | Rear axle housing cover | 38 | 28 | Shock absorber mounting ‐ top | 46 | 34 | Shock absorber mounting ‐ bottom | 80 | 59 | Wheel nut ‐ 6 hole rim | 168* | 124* | Hub nut | 540 | 398 | Spring U‐bolt | 135 | 100 | Spring bolt ‐ front | 186 | 137 | Spring hanger | 186 | 137 | Rear axle vent screw | 13 | 10 | Half shafts | 117 | 86 | * When removing/refitting the wheels, re‐tighten the bolts to the same torque specification after a distance of 50 km has been travelled. | | | |