Removal and Installation Removal All vehicles | -
Detach the electrical connector from the cooling fan shroud. | | -
Remove the cooling fan shroud right-hand retaining nut. | | -
Remove the cooling fan shroud left-hand retaining nut. | | -
Using suitable pieces of wire, support the radiator. | Vehicles with charge air cooler | -
Disconnect the charge air cooler intake pipe from the charge air cooler. | | -
Disconnect the charge air cooler outlet pipe from the charge air cooler. | | -
Disconnect the manifold absolute pressure and temperature (MAPT) sensor electrical connector. | All vehicles | -
Remove the right-hand air deflector. | | -
Remove the left-hand air deflector. | | -
Remove the radiator support bracket lower bolt. | | -
Remove the radiator support bracket right-hand retaining bolts. | | -
Remove the radiator support bracket. | | -
Disconnect the cooling fan motor electrical connector. | | -
Remove the cooling fan motor and shroud. - Slide the cooling fan motor and shroud upwards out of the retaining brackets and then forwards.
| Installation | -
To install, reverse the removal procedure. | |