Removal and Installation Removal All vehicles | -
Remove the cooling fan. For additional information, refer to Cooling Fan in this section. | Vehicles with exhaust gas recirculation (EGR) | -
Disconnect the EGR vacuum regulator solenoid vacuum lines. | | -
Disconnect the EGR vacuum regulator solenoid electrical connector. | | -
Remove the EGR vacuum regulator solenoid. | All vehicles | -
Detach the vacuum line from the cooling fan shroud. | | -
Disconnect the cooling fan motor electrical connector. | | -
Remove the cooling fan shroud left-hand retaining nut. | | -
Remove the cooling fan shroud right-hand retaining nut. | | -
Remove the cooling fan motor and shroud. - Slide the cooling fan motor and shroud upwards out of the retaining brackets and then forwards.
| Installation | -
To install, reverse the removal procedure. | |