Disassembly and Assembly Disassembly | -
Disconnect the blower motor electrical connectors and unclip the wiring harness. | | -
Remove the heater control unit. - Unclip the left-hand and right-hand cables from the heater core housing.
- Disconnect the left-hand and right-hand cables from the adjusting lever.
| | -
Remove the temperature blend door actuator cover. | | -
Remove the temperature blend door actuator. | | -
Disconnect the vacuum line from the air inlet blend door actuator. | | -
Remove the air inlet blend door actuator. | | -
Remove the blower motor. - Pull up the tab.
- Turn the blower motor counterclockwise and remove it.
| | -
Remove the heater core cover. - Remove the bolt from the bracket.
- Remove the bolts from the heater core cover.
| Assembly | -
To assemble, reverse the disassembly procedure. | | |