Removal and Installation Removal | -
Remove the steering column upper shroud. - Using a thin bladed screwdriver, release the two clips (one each side).
- Remove the shroud.
| | -
Remove the steering column lower shroud. | | -
Remove the steering column multi-function switch from the steering column. - Depress the locking tangs.
- Pull out the steering column multi-function switch.
| | -
Remove the instrument cluster bezel. - Remove the bolts.
- Release the clips and remove the instrument cluster bezel.
| | -
Detach the driver side crash padding console from the crash padding. | | -
Pull the crash padding console forwards and pull off the connectors. | | -
Remove the headlamp switch. | Installation | -
Install the components in the reverse order. | | |