Removal and Installation Materials Name Specification Brake Fluid - Super DOT4 ESD-M6C57-A General Equipment Removal CAUTION:Refer to: Brake System Health and Safety Precautions (100-00 General Information, Description and Operation). NOTE:Removal steps in this procedure may contain installation details. | -
Release the parking brake. | | -
Remove the wheel and tire. Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation). | | -
-
Torque: All other than 460 series vehicles 31 Nm 460 series vehicles 34 Nm | | -
CAUTION:Make sure that all openings are sealed. | | -
NOTE:Note the position of the brake pads to aid installation. | | -
Torque: All other than 460 series vehicles 115 Nm 460 series vehicles 186 Nm | Installation | -
NOTE:Make sure that the brake pad contact points are clean and free of foreign material. To install, reverse the removal procedure. | | -
Bleed the brake system. Refer to: Brake System Bleeding (206-00 Brake System - General Information, General Procedures). Refer to: Brake System Pressure Bleeding (206-00 Brake System - General Information, General Procedures). | | |