Removal and Installation Removal NOTE:Removal steps in this procedure may contain installation details. All vehicles | -
NOTE:Make sure that the road wheels are in the straight ahead position. | | -
Remove the front wheels and tires. Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation). | | -
WARNING:Make sure a new steering column flexible coupling nut and bolt are installed. Torque: 23 Nm | | -
WARNING:Make sure a new tie rod end nut is installed. | Left-hand drive vehicles with 2.2L diesel engine or 2.4L diesel engine | -
WARNING:Be prepared to collect escaping fluids. CAUTION:Make sure that all openings are sealed. | Right-hand drive vehicles with 2.2L diesel engine or 2.4L diesel engine | -
WARNING:Be prepared to collect escaping fluids. CAUTION:Make sure that all openings are sealed. | Left-hand drive vehicles with 2.3L engine | -
WARNING:Be prepared to collect escaping fluids. CAUTION:Make sure that all openings are sealed. | Right-hand drive vehicles with 2.3L engine | -
WARNING:Be prepared to collect escaping fluids. CAUTION:Make sure that all openings are sealed. | All vehicles Installation | -
To install, reverse the removal procedure. | | -
Fill the power steering system. Refer to: Power Steering System Filling (211-00 Steering System - General Information, General Procedures). | | -
Bleed the power steering system. Refer to: Power Steering System Bleeding (211-00 Steering System - General Information, General Procedures). | | -
Check the toe setting and adjust as necessary. Refer to: Front Toe Adjustment (204-00 Suspension System - General Information, General Procedures). | |