| Removal and Installation Special Tool(s) | | 303-254 Locking Tool, Flywheel | Removal NOTE:Removal steps in this procedure may contain installation details. | | - Remove the following items:
-
Refer to: Clutch Disc and Pressure Plate (308-01B Clutch - Vehicles With: VXT-75, Removal and Installation). -
Refer to: Oil Pan (303-01A Engine - 2.3L Duratec-HE (MI4), Removal and Installation). | | | -
Discard the flywheel bolts. Torque: Stage 1: 50 Nm Stage 2: 80 Nm Stage 3: 112 Nm | | | -
NOTE:New crankshaft rear seal carriers are supplied with an alignment sleeve which must be removed after installation. Torque: 10 Nm | Installation | | -
To install, reverse the removal procedure. | | |
/Description and Operation/Diagnosis and Testing/General Procedures/Removal and Installation//img/E65889.jpg)
/Description and Operation/Diagnosis and Testing/General Procedures/Removal and Installation//img/E65890.jpg)
