Removal and Installation General Equipment Ford diagnostic equipment Removal | -
Refer to: Diesel Fuel System Health and Safety Precautions (100-00 General Information, Description and Operation). Refer to: Fuel Injection Component Cleaning (303-04B Fuel Charging and Controls - 2.2L Duratorq-TDCi (Puma) Diesel, General Procedures). | Vehicles with rear wheel drive (RWD) | -
Refer to: Fuel Pump (303-04C Fuel Charging and Controls - 2.4L Duratorq-TDCi (Puma) Diesel, Removal and Installation). | All vehicles | -
CAUTION:The component must be removed by hand. The use of tools is prohibited. | Installation | -
CAUTION:Extreme cleanliness must be exercised when handling these components. NOTE:Make sure that a new component is installed. Insert the fuel metering valve by hand until you feel a click | | -
Torque: Stage 1: 5 Nm Stage 2: 8 Nm | Vehicles with rear wheel drive (RWD) | -
Refer to: Fuel Pump (303-04C Fuel Charging and Controls - 2.4L Duratorq-TDCi (Puma) Diesel, Removal and Installation). | All vehicles | -
Refer to: Fuel System Bleeding (310-00 Fuel System - General Information, General Procedures). | | -
Carry out a Fuel System Leak Test using the following menu options: ToolBox/Powertrain/Service Functions. | | -
Carry out a Pump Learn procedure using the following menu options: ToolBox/Powertrain/Service Functions | |