Ford Workshop Service and Repair Manuals

Aligner, Clutch Plate

308-204 (16-067)

1. Remove the transmission.
   For additional information, refer to: Transmission - 2.4L Duratorq-Di (Puma) Diesel (308-03A Manual Transmission/Transaxle - Vehicles With: MT-75, Removal) /
   Transmission - 2.3L Duratec-HE (MI4) (308-03A Manual Transmission/Transaxle - Vehicles With: MT-75, Removal).
   

2. 

   CAUTION:Loosen the clutch pressure plate retaining bolts by two turns at a time in the sequence shown.
   Remove the clutch disc and pressure plate.

1. Install a new pilot bearing.
   For additional information, refer to: Transmission - 2.4L Duratorq-Di (Puma) Diesel (308-03A Manual Transmission/Transaxle - Vehicles With: MT-75, Removal) /
   Transmission - 2.3L Duratec-HE (MI4) (308-03A Manual Transmission/Transaxle - Vehicles With: MT-75, Removal).
   

2. Using the special tool, centralize the clutch disc on the pressure plate.

3. 

   CAUTION:Tighten the clutch pressure plate retaining bolts finger tight and then by two turns at a time in the sequence shown to the specified torque.
   Using the special tool, install the clutch disc and pressure plate.

4. Remove the special tool.

5. Install the transmission.
   For additional information, refer to: Transmission - 2.4L Duratorq-Di (Puma) Diesel (308-03A Manual Transmission/Transaxle - Vehicles With: MT-75, Installation) /
   Transmission - 2.3L Duratec-HE (MI4) (308-03A Manual Transmission/Transaxle - Vehicles With: MT-75, Installation).