Disassembly and Assembly of Subassemblies Special Tool(s) | 205-047-06 Adapter for 205-047 | | 205-071 Remover, Differential Bearing | | 308-203 Installer, Differential Double Lip Seal | General Equipment Disassembly CAUTION:Use vise jaws protectors. | -
Clamp the differential in a vise. | | - Remove the following items:
-
Save four bolts for reassembly the ring gear. | Assembly CAUTION:Use vise jaws protectors. | -
Clamp the differential in a vise. | | -
Install the four bolts saved during disassembly. Torque: 105 Nm | | -
CAUTION:Make sure that new bolts are installed. Torque: 105 Nm | | -
-
NOTE:Make sure that a new component is installed. If equipped. -
NOTE:Make sure that a new component is installed. The roller bearing must not be lubricated. | | -
NOTE:Make sure that a new component is installed. The roller bearing must not be lubricated. | |