ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Windshield Glass > < Front Door Window Regulator

Transit 2006.5 (04.2006-)

Glass, Frames and Mechanisms - Front Door Window Regulator and Motor Transit 2006.5 (04/2006-)
Removal and Installation

General Equipment
Electric hand drill
5 mm drill bit
Blind rivet gun

Removal

  1. Remove the front door window glass.
    For additional information, refer to: Front Door Window Glass (501-11 Glass, Frames and Mechanisms, Removal and Installation).

  1. NOTE:
    NOTE:Do not remove the front door glass top run inner retaining bracket from the front door glass top run.
    Detach the front door glass top run inner retaining bracket from the door panel.

  1. Remove the front door glass top run.

  1. Disconnect the front door window regulator motor electrical connector.

  1. Detach the front door window regulator and motor from the door panel.
    1. Using a electric hand drill and 5 mm drill bit, remove the rivets.
    1. Remove the nuts.

  1. Remove the front door window regulator and motor.

Installation
  1. Install the front door window regulator and motor.
    1. Install the nuts.
    1. Using a blind rivet gun, install new rivets.

  1. To install, reverse the removal procedure.

Windshield Glass > < Front Door Window Regulator