ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Door Lock Cylinder > < Liftgate Release Handle
Handles, Locks, Latches and Entry Systems - Exterior Rear Door Handle—Chassis Double Cab Transit 2006.5 (04/2006-)
Removal and Installation

Removal

  1. Remove the rear door trim panel. For additional information, refer to Section  501-05 Interior Trim and Ornamentation.

  1. NOTE:
    NOTE:Do not touch the adhesive surface as re-bonding will be impaired.
    Detach the watershield from the rear door panel.

  1. Detach the exterior rear door handle actuating rod from the latch.
    • Open the clip and pull out the actuating rod.

  1. Remove the exterior rear door handle.
    1. Remove the retaining nut.
    1. Detach the actuating rod.

Installation

  1. To install, reverse the removal procedure.

Front Door Lock Cylinder > < Liftgate Release Handle