ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Passenger Air Bag Module > < Scrapped Vehicle Air Bag and Safety Belt Pretensioner Disposal - In-Vehicle Disposal
Supplemental Restraint System - Driver Air Bag Module Transit 2006.5 (04/2006-)
Removal and Installation

Removal

WARNING:
WARNING:The supplemental restraint system (SRS) is active for a certain length of time after the power supply has been disconnected. Wait for a minimum of 3 minutes before disconnecting or removing any SRS components.
WARNING:
WARNING:Wear safety goggles.
WARNING:
WARNING:Do not probe supplemental restraint system (SRS) electrical connectors.
WARNING:
WARNING:Refer to: Supplemental Restraint System (SRS) Health and Safety Precautions (100-00 General Information, Description and Operation).
NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Disconnect the battery ground cable.
    Refer to: Battery Disconnect (414-01 Battery, Mounting and Cables, General Procedures).

Installation

  1. To install, reverse the removal procedure.

Passenger Air Bag Module > < Scrapped Vehicle Air Bag and Safety Belt Pretensioner Disposal - In-Vehicle Disposal