Transit Connect L4-2.0L (2010)
Ignition Switch Lock Cylinder: Removal and Replacement
Ignition Lock Cylinder
Removal and Installation
NOTE: For non-functional ignition lock cylinders, the steering column lock module has to be replaced. For additional information, refer to Steering
Column.
1. Remove the Passive Anti-Theft System (PATS) transceiver. For additional information, refer to Antitheft and Alarm Systems.
2. Remove the ignition lock cylinder.
1. Insert and turn the ignition key to the ACC (I) position.
2. Using a suitable tool such as a pick, press the detent.
3. Remove the lock cylinder.
3. If a new lock cylinder with keys is replaced, the new PATS keys must be programmed. For additional information, refer to Key Programming
Using Diagnostic Equipment in Antitheft and Alarm Systems. See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and
Inspection/Programming and Relearning/Key Programming Using Diagnostic Equipment
4. To install, reverse the removal procedure.