Transit Connect L4-2.0L (2010)
2. NOTE: Make sure that the tumbler and spacer indents align with the locking pin slot.
Install the ignition lock cylinder tumblers and spacers into the ignition lock cylinder barrel as follows:
3. Using a suitable tool (such as a center punch or chisel), crimp the ignition lock cylinder barrel to secure the tumbler retainer.
4. Apply the multi-purpose grease on the lock cylinder barrel in and around the locking pin slot and in the tumbler retainer.
5. NOTE: Install the key hole shield so that the wider land is covering the keyhole.
Install the ignition lock cylinder key hole shield
