Windstar V6-232 3.8L (1995)
B-Pillar Lower Trim
Removal
1. Loosen passenger door weatherstrip.
2. Remove center body pillar inside upper finish panel as described.
3. Remove the RH front door scuff plate as described.
4. Remove the lower sliding door scuff plate as described.
5. Use a Rotunda Windshield and Moulding Trim Removal Kit 107-R0401 or equivalent. Release top portion of RH B-pillar tower trim.
6. Remove the trim from the center body pillar.
7. Slide the front lap belt through the trim.
8. Disconnect the sliding door step lamp electrical connector and remove the RH B-pillar lower trim.
Installation
1. Follow removal procedure in reverse order.
Cowl Side Trim Panel
