Sprinter 2500 V6-3.0L DSL Turbo (2008)
Intake Manifold: Specifications
INTAKE MANIFOLD TORQUE AND SEQUENCE
CAUTION: The right intake manifold upper thermostat housing bolts should be tightened to 8.4 Nm (74 in. lbs.).
1. Install the intake manifold (4). Tighten bolts to 16 Nm (142 in. lbs.), starting in the middle and tightening in a cross pattern outward until reaching
the upper thermostat bolts on the right front manifold.
2. Tighten the upper thermostat bolts on the right cylinder head to 8.4 Nm (74 in.lbs.).
