Sprinter 2500 V6-3.0L DSL Turbo (2008)
Maintenance Required Lamp/Indicator: Service and Repair
Reset Maintenance Indicator
RESET MAINTENANCE INDICATOR
SETTINGS MENU
Optional (With Steering Wheel Switches)
The Settings menu has two functions:
-
To reset: Press the reset button (32) for 3 sec. will reset all settings to the factory defaults
-
A collection of submenus which you can use to make individual settings for your vehicle
1. Press the PAGE FORWARD or PAGE BACKWARDS button repeatedly until you see the Settings menu in the EVIC display.
Resetting settings
You can reset the functions in all submenus to the factory defaults.
1. Press the reset button (32) for approximately 3 seconds. You will see the message in the display prompting you to press the reset button once
more to confirm.
2. Press reset button again. The functions in most submenus are reset to the factory defaults. If you do not press the reset button a second time to
confirm, the changed settings remain set. The Settings menu is displayed again after approximately 5 seconds. For safety reasons, it is not
possible to reset all of the functions while the vehicle is in motion. For example, the "Hdlmp" mode function in the Lighting submenu remains
unchanged.
You can reset the functions of an individual submenu to the factory defaults.
1. Select a function in a submenu.
2. Press reset button (32) for approximately 3 seconds. You will see the message in the display prompting you to press the reset button once more to
confirm.
3. Press reset button again. Most functions in the chosen submenu are reset to the factory defaults. If you do not press the reset button a second time
to confirm, the changed settings remain set. The Settings menu is displayed again after approximately 5 seconds. For safety reasons, it is not
possible to reset all of the functions while the vehicle is in motion. For example, the "Hdlmp" mode function in the Lighting submenu remains
unchanged.