Sprinter 2500 V6-3.0L DSL Turbo (2008)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor - Gas
Intake Camshaft Position Sensor
INTAKE CAMSHAFT POSITION SENSOR
1. Remove the engine cover.
2. Remove the air cleaner and throttle body hose.
3. Disconnect negative battery cable.
4. Disconnect intake camshaft position sensor harness connector (2).
5. Remove intake camshaft position sensor mounting bolt (4).
6. Remove the intake cam position sensor (6).
Exhaust Camshaft Position Sensor
EXHAUST CAMSHAFT POSITION SENSOR
1. Remove the engine cover.
2. Remove the air cleaner and throttle body hose.
3. Disconnect negative battery cable.
4. If necessary, position the power steering fluid reservoir aside.