Sprinter 2500 V6-3.0L DSL Turbo (2008)
Air Injection Pump: Service and Repair
Removal
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the air filter housing and disconnect the air inlet hose (1) from the air pump (2).
3. Remove the air pump solenoid See: Air Diverter Solenoid/Service and Repair/Removal.
4. Remove the 3 bolts (3) from the air pump solenoid bracket (4), and remove the bracket.
5. Disconnect the right air pump outlet tube (1).
6. Disconnect the left air pump outlet tube (2).
7. Disconnect the air pump harness connector (2).
8. Remove the 3 air pump retaining bolts (1).