Sprinter 2500 V6-3.0L DSL Turbo (2008)
EGR Tube: Service and Repair
EGR Tube - Installation
Front EGR Tube
INSTALLATION - FRONT EGR TUBE
1. Clean all front EGR tube mounting surfaces.
2. Install the front EGR tube (4), and install the front EGR tube lower bolts (3). Do not tighten the front EGR tube lower bolts at this time
3. Install a new front EGR tube upper gasket.
4. Install the front EGR tube upper bolts (1).
5. Tighten the front EGR tube lower bolts.
6. Reconnect the negative battery cable.
Rear EGR Tube
INSTALLATION - FRONT EGR TUBE
1. Clean the rear EGR tube mounting surfaces.
2. Install the rear EGR tube.
3. Install the rear EGR tube upper bolts (1). Do not tighten the rear EGR tube upper bolts at this time.
4. Install the rear EGR tube lower bolts (1). Do not tighten the rear EGR tube lower bolts at this time.
