Sprinter 2500 V6-3.0L DSL Turbo (2008)
Turbocharger Vane Actuator: Service and Repair
Installation
INSTALLATION
1. Install actuator rod onto boost pressure positioner (4).
2. Install circlip (1).
3. Position boost pressure positioner and actuator rod onto turbocharger (5).
4. Install mounting bolts (3). Tighten bolts to 8 Nm (70 lbs.in).
5. Install circlip on the actuator rod at the turbocharger end (2).
6. Connect electrical connector (6).
7. Install the turbo heat shield.
8. Connect negative battery cable.
9. Install air cleaner housing.
10. Connect negative battery cable.