Sprinter 2500 V6-3.0L DSL Turbo (2008)
Wait To Start Light: Description and Operation
Description
DESCRIPTION
A wait-to-start indicator is standard equipment in all instrument clusters. However, on vehicles not equipped with the optional diesel engine, this
indicator is electronically disabled. The wait-to-start indicator is located above and to the left of the speedometer needle hub.
The wait-to-start indicator consists of a stencil-like cutout of the International Control and Display Symbol icon for Diesel Preheat in the opaque layer
of the instrument cluster overlay. The dark outer layer of the overlay prevents the indicator from being clearly visible when it is not illuminated. An
amber Light Emitting Diode (LED) behind the cutout in the opaque layer of the overlay causes the indicator to appear in amber through the translucent
outer layer of the overlay when it is illuminated from behind by the LED, which is soldered onto the instrument cluster electronic circuit board.
The wait-to-start indicator is serviced as a unit with the instrument cluster.
