Sprinter 2500 V6-3.0L DSL Turbo (2008)
5. Disconnect exhaust camshaft position sensor harness connector (1).
6. Remove the exhaust camshaft position sensor mounting bolt (3).
7. Remove the exhaust camshaft position sensor (5).
Intake Camshaft Position Sensor
INTAKE CAMSHAFT POSITION SENSOR
1. Lubricate sensor o-ring.
2. Install the intake camshaft position sensor (5) so that it is fully seated on the mounting surface.
3. Install the intake camshaft position sensor bolt (3). Tighten to 9 Nm (80 in. lbs.).
4. Reconnect the intake cam position sensor harness connector (1).
5. Reconnect the negative battery cable.
6. Install the air cleaner and throttle body hose.
Exhaust Camshaft Position Sensor
EXHAUST CAMSHAFT POSITION SENSOR
1. Lubricate sensor o-ring.