geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 6444 > < System Relay, HVAC|Locations|Page 6437
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Air Bag Disarming and Arming

Disabling the SIR System

DISABLING THE SIR SYSTEM

REMOVE OR DISCONNECT

^

Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.

^

Remove the key from the ignition switch.

1. AIR BAG-IG Fuse from the Airbag Fuse Box, located near the base of the steering column.
2. The steering wheel side cap, Connector Position Assurance (CPA) and the driver inflator module connector.

^

Pull the I/P compartment out while pushing the RH and LH stoppers in.

3. The CPA and the yellow 4-way connector for the Passenger inflator module.

IMPORTANT

^

With the AIR BAG-IG Fuse removed and the ignition switch in the "ON" position, the AIR BAG warning lamp illuminates. This is normal
operation and does not indicate a SIR system malfunction.

Enabling the SIR System

ENABLING THE SIR SYSTEM

Air Bag Disarming and Arming|Page 6444 > < System Relay, HVAC|Locations|Page 6437