Metro L4-079 1.3L VIN 9 TBI (1995)
IMPORTANT
^
With the AIR BAG-IG Fuse removed and the ignition switch in the ON position, the AIR BAG warning lamp illuminates. This is normal
operation and does not indicate a SIR system malfunction.
INSTALL OR CONNECT
^
Remove the key from the ignition switch.
1. Connector Position Assurance (CPA) and yellow 4-way connector for passenger inflator module.
^
Close the Instrument Panel (I/P) compartment.
2. CPA and driver inflator module connector and steering wheel side cap.
3. The AIR BAG-IG Fuse to the Airbag fuse box, located near the base of the steering column.
^
Staying well away from both air bags, turn the ignition switch to the ON position. Verify that the AIR BAG warning lamp flashes seven times
and then stays OFF. If the AIR BAG warning lamp does not operate as described, perform the SIR Diagnostic System Check.
