Prizm L4-1.8L DOHC (1994)
Refrigerant Oil: Capacity Specifications
Compressor Model .......................................................................................................................................................................................................... [05]
Oil Charge (FL. Oz.) When Replacing Component
Compressor ...................................................................................................................................................................................................................... [03]
Evaporator ............................................................................................................................................................................................................................ 3
Condenser ........................................................................................................................................................................................................................ [07]
Receiver & Dehydrator ..................................................................................................................................................................................................... 3.5
[03] Drain oil from old compressor and measure, then drain new compressor. If more than one ounce is drained from old compressor, add same amount
to new compressor. If less than one ounce is drained from compressor, add two ounces.
[05] Nippondenso 10PA15.
[07] Drain oil from old condenser and measure. If more than .5 ounce is drained from old condenser, add same amount to new condenser. If less than .5
ounce is drained from condenser, add .5 ounce.