geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 4473 > < Service Port HVAC|Locations
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Air Bag Disarming and Arming

Disabling the SIR System

    The diagnostic energy reserve module (DERM) can maintain voltage to cause a system deployment for up to ten minutes after the ignition
switch is turned off and the battery is disconnected. Servicing the SIR system during this period may result in accidental deployment and
personal injury.

1.

Turn ignition switch to Off position, then remove METER fuse (C-22) and SIR fuse (C-23).

2.

Remove lower bolster panel.

3.

Remove connector position assurance (CPA) lock and disconnect orange 3-way connector at the base of the steering column.

Enabling the SIR System

1.

Connect 3-way orange connector and install CPA lock.

2.

Install lower bolster panel.

3.

Install METER fuse and SIR fuse.

4.

Turn ignition switch to Run position and ensure ``Inflatable Restraint'' lamp flashes 7 times and then remains off.

Air Bag Disarming and Arming|Page 4473 > < Service Port HVAC|Locations