Tracker 4x2 L4-1.6L VIN 6 (1995)
Throttle Cable/Linkage: Adjustments
Accelerator Control Cable
ACCELERATOR CONTROL CABLE ADJUSTMENT
INSPECT
Accelerator control cable end play (refer to accompanying image). If the cable end play is not 10 to 15 mm (0.4 to 0.6 inch), loosen the adjusting
nut and the cable locknut at the Throttle Body Injection (TBI) unit.
ADJUST
Accelerator control cable end play until it is within specification. Be sure to tighten cable locknut and adjusting nut after adjustment is complete.
TIGHTEN
Accelerator cable locknut adjusting nut to 25 Nm (18 lb. ft.).