C 1500 Truck 2WD V8-4.8L VIN V (2000)
2. Remove the windshield pillar moldings.
3. Remove the drivers side accessory housing (1) from the IP.
4. Remove the IP upper brackets.
5. Remove the transfer case control module, if equipped.
6. Release the pressure on the headliner wire harness by removing the wire harness retainer (1) from the IP support beam.
7. Disconnect the headliner wire connectors from the junction block located next to the clutch or brake pedal.
8. Remove the wire harness retainers along the windshield pillar.
9. Follow the routing of the wire harness through the IP and release any wire harness retainers.
10. Carefully pull out the wire harness from the windshield pillar ensuring that the wire harness does not get caught on any part.
11. Remove the rear quarter trim panels, if necessary.
12. Remove the overhead console, if equipped.
13. Remove both front sunshades.
14. Remove the rear coat hook, if equipped.