gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Headlining Trim Panel Replacement (Pickup)|Page 14964 > < Headlining Trim Panel Replacement (Pickup)|Page 14962
Page 3
background image

15. Remove the interior dome lamp.
16. Remove the assist handles, if equipped.

17. Disengaging the front of the headliner from the roof.
18. If replacing the crew cab headliner remove the rear window from the vehicle. Refer to Rear Window Replacement (Pickup) Rear Window

Replacement (Utility w/Cargo Door) in Heated Glass Element.

19. Remove the headliner from the vehicle by grasping the headliner on the left and the right sides near the front of the cab

Installation Procedure

1. With the aid of an assistant install the headliner to the vehicle.
2. Install the rear window into the vehicle, if removed.
3. Install the assist handles, if equipped.
4. Install the interior dome lamp.
5. Install the rear coat hook, if equipped.
6. Install both front sunshades.
7. Install the overhead console, if equipped.
8. Install the rear quarter trim panels, if needed.
9. Carefully route the wire harness through the IP in order to connect the wire to the junction block located next to the clutch or brake pedal.

10. Install the transfer case control module, if equipped.

Important: Ensure that all of the wire harness retainers in the IP and the windshield pillar are all pressed into place in order to prevent rattling
during driving.

11. Press in the wire harness retainer (1) in order to secure the harness.

Headlining Trim Panel Replacement (Pickup)|Page 14964 > < Headlining Trim Panel Replacement (Pickup)|Page 14962