C 1500 Truck 2WD V8-4.8L VIN V (2000)
Inflatable Restraint Instrument Panel Module Replacement
REMOVAL PROCEDURE
CAUTION:
^
Refer to SIR Handling Caution in Cautions and Notices.
^
Refer to Inflator Module Handling And Storage Caution in Cautions and Notices.
1. Disable the SIR system.
2. Remove upper IP trim panel to access the two of the four bolts.
3. Open the instrument panel compartment door, lift stop and allow door to fully open.
4. Remove the yellow 2-way electrical harness connector (1) at the left side of the mounting bracket.
5. Remove the Connector Position Assurance (CPA) (2) from the yellow 2-way electrical harness connector (1).
6. Remove the inflatable restraint IP module (1) from the front of the instrument panel. Ensure that you keep a firm hold of the IP module.
7. Remove the inflatable restraint IP module yellow pigtail connector (2) from the yellow 2-way electrical harness connector (3).
8. Remove the fasteners attaching the inflatable restraint IP module to the mounting bracket.
INSTALLATION PROCEDURE