C 1500 Truck 2WD V8-4.8L VIN V (2000)
1. Install the inflatable restraint IP module (1) to the mounting bracket through the front of the instrument panel.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the fasteners to the inflatable restraint IP module.
Tighten
Tighten the fasteners to 10 N.m (89 lb in).
3. Install the inflatable restraint IP module yellow pigtail connector (2) to the yellow 2-way electrical harness connector (3).
4. Install the Connector Position Assurance (CPA) (4).
5. Install the yellow 2-way electrical harness connector (3) to the left side of the mounting bracket.
6. Close the instrument panel compartment door.
7. Install the two retaining bolts.
8. Install the upper IP trim panel.
9. Enable the SIR system.
Front Seat Side Impact Inflator Module Replacement
Refer to Side Air Bag service procedures.
See: Side Air Bag