C 1500 Truck 2WD V8-4.8L VIN V (2000)
Important: Use care not to score the steering gear housing bore when prying out the seals and the washers.
11. Use a screwdriver to pry the backup washer (3) and the double lip seal (2) from the steering gear housing (1).
12. Inspect the steering gear housing (1) for burrs.
13. Remove the steering gear housing (1) if necessary.
14. Insert J6278 through the hole in the top of the steering gear housing (1).
15. Drive out the needle bearing (2).
Assembly Procedure
-
Tools Required
-
J 6278 Pitman Shaft Bearing Remover and Installer
-
J 4245 Internal Snap Ring Pliers