C 1500 Truck 2WD V8-4.8L VIN V (2000)
![background image](/gmc/c_1500_truck_2wd/v8-4.8l_vin_v/Page-2789003.png)
1. Coat the double lip seal (2) and the washer (3) with grease.
2. Install the needle bearing (2) to the steering gear housing (1) using J6278.
3. Install the double lip seal (2).
4. Install the backup washer (3).
5. Install the retaining ring using J 4245.
6. Install the pitman shaft and the side cover. Refer to Steering Gear Pitman Shaft and Housing Cover Replacement - Off Vehicle (700 Gear) or
Steering Gear Pitman Shaft and Housing Cover Replacement- Off Vehicle f670 Gear)
7. Install the dust seal (1).