C 3500 Truck 2WD V8-8.1L VIN G (2001)
1. Install the quarter panel.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the quarter panel trim screws.
Tighten the quarter panel trim screws to 2 N.m (18 lb in).
3. Install the rear screw into the sill trim plate.
4. Install the rear window lower molding.
5. Install the jack and tool stowage.
6. Install the coat hook.
Rear Window Lower Garnish Molding Replacement
Rear Window Lower Garnish Molding Replacement
Removal Procedure
1. Carefully pull the lower edge of the molding in order to release the four clips.
2. Lift the molding up and away from the glass in order to release the upper retainers.
Installation Procedure
1. Align the molding clips with the holes in the body panel along the back glass.
2. Snap the molding into place.
3. Apply light pressure along the top of the molding at the glass to ensure proper seating of molding.
4. Align the lower row molding clips.
5. Snap the lower portion of the molding into place.