C 3500 Truck 2WD V8-8.1L VIN G (2001)
Keyless Entry Transmitter Battery: Service and Repair
TRANSMITTER BATTERY REPLACEMENT
REMOVAL PROCEDURE
Under normal use, the battery in the transmitter will last about 2 years. For battery replacement, use a Panasonic(R) 3 volt, type CR2032, or the
equivalent.
1. In order to open the transmitter case, perform the following steps:
1.1. Insert a dime between the 2 halves of the transmitter near the key ring hole.
1.2. Twist the dime.
2. Remove the battery.
INSTALLATION PROCEDURE