C 3500 Truck 2WD V8-8.1L VIN G (2001)
1. Install the brake hose. Do not twist the hose when installing the hose.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the brake hose mounting bolt and new compression washers at the caliper.
^
Tighten the bolt to 45 Nm (33 ft. lbs.).
3. Install the brake hose bolt and the bracket to the axle.
^
Tighten the bolt to 25 Nm (18 ft. lbs.).
4. Install the brake hose retaining clip.
5. Connect the brake pipe.
^
Tighten the fitting to 25 Nm (18 ft. lbs.).
6. Bleed the brake system.
7. Install the tire and wheel assembly.
8. Remove the safety stands.
9. Lower the vehicle.