C 3500 Truck 2WD V8-8.1L VIN G (2001)
5. Position the wiring harness ground and negative cables. Position the anti-rotation tab on the negative cable in the correct location.
6. Install the engine wiring harness ground/negative cable bolt.
Tighten
Tighten the engine wiring harness ground/negative cable bolt to 25 N.m (18 lb ft).
7. Lower the vehicle.
8. Install the negative cable clip to the positive cable clip.
9. Install the engine wiring harness ground/negative cable bolt.
Tighten
Tighten the engine wiring harness ground/negative cable bolt to 25 N.m (18 lb ft).
10. Lower the vehicle.
11. Install the negative cable clip to the positive cable clip.
