C 3500 Truck 2WD V8-8.1L VIN G (2001)
5. Push the main transmission connector (2) outward through the hole (1) in the main housing until the retaining "feet" on the connector are nearing
the locked position.
6. Use the J 44247 to complete the seating of the retaining "feet" that lock the connector (1) into the main housing.
7. Install the detent spring assembly (2) onto the control valve assembly. Confirm that the roller of the detent spring assembly rests on the detent
lever (1).
8. Install two detent spring bolts (3).
^
Tighten the bolts to 12 Nm (108 inch lbs.).
9. Install the oil pan and suction filter.
10. Connect the external wiring harness to the main transmission connector.