Canyon 2WD L4-2.9L (2008)
1. Install the upper side access door trim panel to the door, ensuring that all the retaining tabs are fully seated.
2. Install the lower side access door trim panel to the door, ensuring that all the retaining tabs are fully seated.
Notice: Refer to Fastener Notice.
3. Install the 2 retaining screws in the armrest.
Tighten the rear side access door armrest screws to 2 N.m (18 lb in).
4. Install the front seat belt assembly. Refer to Front Seat Belt Replacement (Crew Cab) (See: Restraint Systems/Seat Belt Systems/Seat Belt/Service
and Repair/Front Seat Belt Replacement (Crew Cab))Front Seat Belt Replacement (Regular and Extended Cab) (See: Restraint Systems/Seat Belt
Systems/Seat Belt/Service and Repair/Front Seat Belt Replacement (Regular and Extended Cab)) .