Canyon 2WD L4-2.9L (2008)
2. Remove the jack from the stowage bracket by turning the jack handle to loosen the jack.
3. Remove the 2 bolts securing the jack stowage bracket to the vehicle.
Installation Procedure
1. Position the jack stowage bracket on the floor stud in the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the 2 bolts securing the jack stowage bracket to the vehicle.
Tighten the jack stowage bracket bolts to 9 N.m (79 lb in).